How to Swap Ear Tips on Loop Switch 2 for a Custom Fit

Quick answer

To swap ear tips on your Loop Switch 2, gently pull the old tip off the nozzle, align the new tip's opening with the nozzle, and press firmly until it snaps into place. The process takes seconds and lets you adjust fit, comfort, or color.

Step-by-step guide to swapping ear tips on Loop Switch 2

1. Remove the old ear tip: Hold the Loop Switch 2 by the body (not the rotating ring). Grip the base of the ear tip and gently pull it away from the nozzle. It should slide off with light resistance. If it feels stuck, twist the tip slightly while pulling. Common mistake: pulling the rotating ring instead of the body can accidentally change the noise mode. Always hold the main body.
2. Choose the right size and color: Select a new tip from the multicolor set. If you are unsure about size, start with the standard size included in the pack. The different colors let you assign a specific shade to each earplug for easy identification later. Checkpoint: make sure the tip is clean and free of debris before fitting it onto the nozzle.
3. Align and press the new tip onto the nozzle: Line up the opening of the ear tip with the nozzle of the Switch 2. Push it straight on until you feel and hear a soft click. The tip should sit flush against the base of the nozzle with no gap. Common mistake: pressing at an angle can cause the tip to sit crooked, breaking the seal. Push straight on and check alignment by eye.
4. Test the fit and seal: Insert the earplug into your ear and gently twist until it feels snug. Cup your hands over your ears and release — a proper seal will create a slight suction. If the earplug feels loose or sound leaks, try a different tip size. Checkpoint: if the tip feels comfortable but the seal is weak, the tip may be too small. If it feels pressured or sore, the tip is likely too large.

Product facts

• Loop Switch™ 2 Ear Tips – Multicolor: The Loop Switch™ 2 Ear Tips – Multicolor set is designed as a convenient accessory exclusively compatible with Loop Switch™ 2 earplugs. This means you can swap tips without worrying about fit, and the multicolor pack helps you quickly identify which size is on each earplug.